Advanced EV Advent With Advanced EV/LVTong Controller
Now that we have identified which controller is in your vehicle we can take a look at what is required to connect to the vehicle and make your desired changes.
1. Observe & Identify The Controller
Advanced EV/LVTong Controller |
2. Locate & Identify Programming Port
The programming port is located in the battery bay under the seat next to the Run/Tow switch. It may have a protective cap on it which will need to be removed for the check and also during programming. |
3. Programming Cable - Advanced EV/LVTong Controller
To establish a connection with the Advanced EV/LVTong controller in your Advent golf cart you will need to use CartCables part # CC-CBL-ICONSE. It can be purchased HERE NOTE: The ICON & Advanced EV Controllers are both private label controllers installed in the vehicles by LVTong, They come from the same factory so we use our ICON cable for both the ICON & the Advance EV controllers. |
4. Programming Software - Advanced EV/LVTong Controller
In addition to the programming cable you will need to have a copy of the "LVTongLIVE" software loaded on your pc. WE DO NOT PROVIDE THE SOFTWARE. |
Please note: We do not sell the software, just the cables.
If you have any further questions, please do not hesitate to contact us HERE.