Bintelli A Model With Curtis Controller
Now that we have identified which controller is in your vehicle we can take a look at what is required to connect to the vehicle and make your desired changes.
1. Observe & Identify The Controller
 |
| Curtis Controller |
2. Locate & Identify Programming Port
 |
| The programming port on the A Model cart is located on the lower portion of the passenger side dash, just to the left of the glove box and under the dash-mounted accessory switches. |
3. Programming Cable - Curtis Controller
 |
| To establish a connection with the Curtis controller in your Bintelli cart you will need to use CartCables part # CC-CBL-1309. It can be purchased HERE |
4. Programming Software - Curtis Controller
 |
| In addition to the programming cable you will need to have a copy of the "Curtis 1314 PC Programming Station" software loaded on your pc. WE DO NOT PROVIDE THE SOFTWARE. |
Please note: We do not sell the software, just the cables.
If you have any further questions, please do not hesitate to contact us HERE.