Bintelli Nexus Controller ID Guide
1. Locate the controller
|
| To access the controller on the Bintelli Nexus, you need to locate the access hatch situated under the rear seat of the vehicle. The rear cover, held in place by two plastic rivets, can be removed by sliding your hand between the body and the panel and pulling straight back. If you have the rear cooler insert in the backseat, it will need to be removed first. |
2. Access the controller
 |
| With the access hatch removed, you can see the controller box. It has a black plastic cover labeled "ExCar," which will also need to be removed to see the controller. NOTE: The "ExCar" label on the controller box is not indicative of any controller type, Its simply the vehicle manufacture's marking on their parts, This cover needs to be removed to positively identify the controller in the vehicle. |
3. Observe & Identify The Controller
 |
| With the cover removed, you can easily see the controller. The controller in this model vehicle (2024) is the Bintelli 450A. While the cover is off, it’s a good idea to take a photo of the white square sticker containing all the controller information. Once you have verified the controller, you can close the cover back up. |
4. Observe & Identify The Controller
 |
| With the cover removed, you can easily see the controller. The controller in this model vehicle (2024) is the Bintelli 450A. While the cover is off, it’s a good idea to take a photo of the white square sticker containing all the controller information. Once you have verified the controller, you can close the cover back up. |
5. Locate & Identify Programming Port
 |
| The programming port on the Nexus cart is located on the lower portion of the passenger side dash, just to the left of the glove box and under the dash-mounted accessory switches. |
Now that we have identified the controller in your vehicle we can take a look at the required equipment to connect to the vehicle and make your desired changes.
6. Programming Cable
 |
| To establish a connection with the Bintelli controller in your Nexus golf cart you will need to use CartCables part # CC-CBL-EXCSE. It can be purchased HERE |
8. Programming Software
 |
| In addition to the programming cable you will need to have a copy of the "ExCarLIVE" software loaded on your pc. WE DO NOT PROVIDE THE SOFTWARE. |
Please note: We do not sell the software, just the cables.
If you have any further questions, please do not hesitate to contact us HERE.