E-Land Maui Classic Model With ExCar Controller

Now that we have identified which controller is in your vehicle we can take a look at what is required to connect to the vehicle and make your desired changes.

1. Observe & Identify The Controller

ExCar Controller


2. Locate & Identify Programming Port

The programming port on the Classic Model cart is located on the lower portion of the dash. An adapter is required to use the standard programming cables with this style of port.


3. Programming Cable - ExCar Controller

To establish a connection with the ExCar controller in your classic model golf cart you will need to use CartCables part # CC-CBL-EXCSE. It can be purchased HERE


4. Programming Cable - ExCar Controller

In addition to our programming cable, you will also need our ExCar adapter cable to use the standard programming cables with the unique round plug found on the dash of ExCar vehicles. The part number for this adapter cable is CartCables #CC-ADP-EXCAR. It can be purchased HERE


5. Programming Software - ExCar Controller

In addition to the programming cable you will need to have a copy of the "ExCarLIVE" software loaded on your pc. WE DO NOT PROVIDE THE SOFTWARE.


Please note: We do not sell the software, just the cables.

If you have any further questions, please do not hesitate to contact us HERE.