EPIC E-Series With Curtis Controller

Now that we have identified which controller is in your vehicle we can take a look at what is required to connect to the vehicle and make your desired changes.

1. Observe & Identify The Controller

Curtis Controller

 

2. Locate & Identify Programming Port

The programming port for vehicles with the Curtis controller will have the standard Molex 4-pin connector. You may have to do some hunting, as they are tucked away and hidden quite well on these vehicles. The cable and plug are likely bundled with the other cables coming out of the controller housing and may be between the box and the batteries. You must locate this connector, as this is what you will use to connect your vehicle to the computer.

 

3. Programming Cable - Curtis Controller

To establish a connection with the Curtis controller in your EPIC you will need to use CartCables part # CC-CBL-1309. It can be purchased HERE

 

4. Programming Software - Curtis Controller

In addition to the programming cable you will need to have a copy of the "Curtis 1314 PC Programming Station" software loaded on your pc. WE DO NOT PROVIDE THE SOFTWARE.

Please note: We do not sell the software, just the cables.

If you have any further questions, please do not hesitate to contact us HERE.