EV Titan Ghost Controller ID Guide

1. Locate the controller

The controller on the Ghost model is located under the seat in the battery bay on the passenger side of the cart. It is mounted in a black protective box with the tow/run switch mounted on the cover.

 

2. Access & Identify The Controller

x

To access the controller you will need to remove the cover from the controller box. With the cover removed, you can easily see & identify the controller. The Ghost uses a controller made by

  

3. Locate & Identify Programming Port

x

The programming port on the Ghost is located close to the controller.

 

Now that we have identified the controller in your vehicle we can take a look at the required equipment to connect to the vehicle and make your desired changes.

4. Programming Cable

x

To establish a connection with the x controller in your EV Titan golf cart you will need to use CartCables part # x. It can be purchased HERE

 

5. Programming Software

x

In addition to the programming cable you will need to have a copy of the "x" software loaded on your pc. WE DO NOT PROVIDE THE SOFTWARE.

 

Please note: We do not sell the software, just the cables.

If you have any further questions, please do not hesitate to contact us HERE.