ExCar M Model With Curtis Controller

Now that we have identified which controller is in your vehicle we can take a look at what is required to connect to the vehicle and make your desired changes.

1. Observe & Identify The Controller

Curtis Controller

 

2. Locate & Identify Programming Port

The programming port on the M Model cart is located on the lower portion of the passenger side dash, just to the left of the glove box. An adapter is required to use the standard programming cables with this style of port.

 

3. Programming Cable - Curtis Controller

To establish a connection with the Curtis controller in your ExCar cart you will need to use CartCables part # CC-CBL-1309. It can be purchased HERE

 

4. Programming Cable - Curtis Controller

x
In addition to our programming cable, you will also need our ExCar adapter cable to use the standard programming cables with the unique round plug found on the dash of ExCar vehicles. The part number for this adapter cable is CartCables #CC-ADP-EXCAR. It can be purchased HERE

 

5. Programming Software - Curtis Controller

In addition to the programming cable you will need to have a copy of the "Curtis 1314 PC Programming Station" software loaded on your pc. WE DO NOT PROVIDE THE SOFTWARE.

Please note: We do not sell the software, just the cables.

If you have any further questions, please do not hesitate to contact us HERE.