FTR 2 Model With NEOS Controller
Now that we have identified which controller is in your vehicle we can take a look at what is required to connect to the vehicle and make your desired changes.
1. Observe & Identify The Controller
NEOS Controller |
2. Locate & Identify Programming Port
The programming port on the 2 Model cart is located on the lower portion of the passenger side dash, just to the left of the glove box. An adapter is required to use the standard programming cables with this style of port. |
3. Programming Cable - NEOS Controller
To establish a connection with the NEOS controller in your cart you will need to use CartCables part # CC-CBL-NEOSCB. It can be purchased HERE |
4. Programming Cable - NEOS Controller
x |
In addition to our programming cable, you will also need our ExCar adapter cable to use the standard programming cables with the unique round plug found on the dash of ExCar vehicles. The part number for this adapter cable is CartCables #CC-ADP-EXCAR. It can be purchased HERE |
5. Programming Cable - NEOS Controller
In addition to our programming cable you will also need to have this specific CANUSB adapter which is NOT included with our cable- It must be purchased separately, directly from the manufacturer. Visit their site: www.canusbshop.com |
6. Programming Software - NEOS Controller
In addition to both cables you will also need to have a copy of the "NEOS Tune" software loaded on your pc. WE DO NOT PROVIDE THE SOFTWARE. |
Please note: We do not sell the software, just the cables.
If you have any further questions, please do not hesitate to contact us HERE.