Polaris Breeze Controller ID Guide

1. Locate the controller

The controller on the Breeze is located under the seat in the battery bay.

2. Access the controller

To access the controller the rear seat bottom will need to be lifted up.

3. Observe & Identify The Controller

With the seat bottom removed you can see the controller pretty easily. The controller in this model vehicle a Sevcon MillipaK controller.

4. Locate Programming Port

The programming port is located right on the front lower corner of the controller it self. It is a white 6 pin connector.

 

Now that we have identified the controller in your vehicle we can take a look at the required equipment to connect to the vehicle and make your desired changes.

5. Programming Cable

To establish a connection with the Sevcon MillipaK controller in your Breeze golf cart you will need to use CartCables part # CC-CBL-SEVMPK. It can be purchased Here.

 

6. Programming Software

In addition to the programming cable you will need to have a copy of the Sevcon "PCpaK" software loaded on your pc. WE DO NOT PROVIDE THE SOFTWARE.

 

Please note: We do not sell the software, just the cables.

If you have any further questions, please do not hesitate to contact us HERE.