Royal EV Majesty Controller ID Guide

1. Locate the controller

The controller on the Majesty is located under the rear seat. To access it, simply flip up the seat cushion—the controller will be visible right there.

  

2. Observe & Identify The Controller

With the seat flipped up, you can clearly see the controller. The Majesty model cart uses the 450A JHL controller.

 

3. Locate & Identify Programming Port

The programming port on the Majesty is located very close to the controller. It’s a white 4-pin connector with nothing plugged into it.

Now that we have identified the controller in your vehicle we can take a look at the required equipment to connect to the vehicle and make your desired changes. 

4. Programming Cable

x

To establish a connection with the controller in your Majesty you will need to use CartCables part number CC-CBL-JHLSE3. It can be purchased HERE.

 
5. Programming Software

In addition to the programming cable you will need to have a copy of the "JHLLive" software loaded on your pc. WE DO NOT PROVIDE THE SOFTWARE.

 

Please note: We do not sell the software, just the cables.

If you have any further questions, please do not hesitate to contact us HERE.