Advanced EV Advent Controller ID Guide

Advanced EV uses 3 different controller models in their Advent model vehicles. It's crucial to identify which controller your vehicle has because each model requires specific equipment that is not compatible with the others. Using the correct cable and software for your controller is mandatory—these components are not universal, and mixing them is not possible.

1. Locate the controller

To access the controller on the Advent you will need to remove the rear bag well liner, This can be real tough to do with the rear seat installed. Some have luck accessing from underneath the vehicle. This photo shows the rear bag well liner.

 

2. Access the controller

x

With the bag well liner/access hatch removed, you can see the controller box. It has a black plastic cover which will also need to be removed to see the controller.

 

3. Access & Identify The Controller

With the cover removed, you can easily see the controller. Use the photos below to identify which controller type is on your vehicle. (Advanced EV/LVTong Controller Shown Here)

 

 4. Identify The Controller - Advanced EV/LVTong Controller

Advanced EV/LVTong Controller Pictured Above

 

5. Identify The Controller - NEOS Controller

NEOS Controller Pictured Above

  

6. Identify The Controller - Curtis Controller

Curtis Controller Pictured Above

 

Now that we have identified the controller in your vehicle we can take a look at the required equipment to connect to the vehicle and make your desired changes. 

For Advanced EV/LVTong Controller Click Here
Or
For NEOS Controller Click Here
Or
For Curtis Controller Click Here

If you have any further questions, please do not hesitate to contact us HERE.