Advanced EV EV1 Controller ID Guide

Advanced EV uses three distinct controller models in their EV1 model vehicles. It's crucial to identify which controller your vehicle has because each model requires specific equipment that is not compatible with the others. Using the correct cable and software for your controller is mandatory—these components are not universal, and mixing them is not possible.

1. Locate the controller

To access the controller on the EV1, you need to locate the access hatch situated under the rear seat of the vehicle. The rear cover is held on with a couple of screws. If you have the rear cooler insert for your backseat, it will need to be removed first.


2. Access the controller

With the access hatch removed, you can see the controller box. It has a black plastic cover which will also need to be removed to see the controller.


3. Access & Identify The Controller

With the cover removed, you can easily see the controller. Use the photos below to identify which controller type is on your vehicle. (Advanced EV/LVTong Controller Shown Here)


 4. Identify The Controller - Advanced EV/LVTong Controller

Advanced EV/LVTong Controller Pictured Above


5. Identify The Controller - NEOS Controller

NEOS Controller Pictured Above


6. Identify The Controller - Curtis Controller

Curtis Controller Pictured Above


Now that we have identified the controller in your vehicle we can take a look at the required equipment to connect to the vehicle and make your desired changes. 

For Advanced EV/LVTong Controller Click Here
For NEOS Controller Click Here
For Curtis Controller Click Here

If you have any further questions, please do not hesitate to contact us HERE.