EPIC E-Series Controller ID Guide

EPIC uses 2 different controller models in their vehicles. It's crucial to identify which controller your vehicle has because each model requires specific equipment that is not compatible with the others. Using the correct cable and software for your controller is mandatory—these components are not universal, and mixing them is not possible.

1. Locate the controller

The controller on the EPIC is located under the seat in the battery bay on the passenger side of the cart. It is mounted in a black protective box with the tow/run switch mounted to the cover.

2. Access the controller & Identify The Controller

To access the controller you will need to remove the cover from the controller box. It is held on with 6 screws. With the cover removed, you can easily see the controller. Use the photos below to identify which controller type is on your vehicle. (Enpower/Marshall/ICON Controller Shown Here)

 3. Identify The Controller - Enpower/Marshall/ICON Controller

Enpower/Marshall/ICON Controller Pictured Above

4. Identify The Controller - Curtis Controller

Curtis Controller Pictured Above

Now that we have identified the controller in your vehicle we can take a look at the required equipment to connect to the vehicle and make your desired changes. 

For Enpower/Marshall/ICON Controller Click Here
For Curtis Controller Click Here

If you have any further questions, please do not hesitate to contact us HERE.