Bintelli A Model Controller ID Guide

Bintelli uses three distinct controller models in their A Model model vehicles. It's crucial to identify which controller your vehicle has because each model requires specific equipment that is not compatible with the others. Using the correct cable and software for your controller is mandatory—these components are not universal, and mixing them is not possible.

1. Locate the controller

 
To access the controller on the A Model, you need to locate the access hatch situated under the rear seat of the vehicle. The rear cover, held in place by two plastic rivets, can be removed by sliding your hand between the body and the panel and pulling straight back. If you have the rear cooler insert in the backseat, it will need to be removed first.

 

2. Access the controller

With the access hatch removed, you can see the controller box. It has a black plastic cover labeled "ExCar," which will also need to be removed to see the controller.

 

3. Observe & Identify The Controller

With the cover removed, you can easily see the controller. Use the photos below to identify which controller type is on your vehicle. (Bintelli/ExCar Controller Shown Here)

 

 4. Identify The Controller - Bintelli/ExCar Controller

 
Bintelli/ExCar Controller Pictured Above

 

5. Identify The Controller - Curtis Controller

 
Curtis Controller Pictured Above

 

6. Identify The Controller - NEOS Controller

 
NEOS Controller Pictured Above

 

Now that we have identified the controller in your vehicle we can take a look at the required equipment to connect to the vehicle and make your desired changes. 

For Bintelli/ExCar Controller Click Here
Or
For Curtis Controller Click Here
Or
For NEOS Controller Click Here

If you have any further questions, please do not hesitate to contact us HERE.